Daily 8 AM–8 PMFound. Fixed. Tested.

Dallas–Fort Worth

Leak Detection in Dallas–Fort Worth

The wet spot is only where the water ended up. We test the system in sections, trace the leak back to its source and open only what the repair needs.

  • A price before any work starts
  • Your approval before we begin
  • Tested before we go
Red and blue PEX water lines joined to copper pipe with brass fittings inside an opening cut in a white wall

What you should know

A stain on the ceiling tells you where water stopped. It rarely tells you where the pipe failed. Water runs down studs, rides along the top of a pipe or spreads under flooring before it surfaces, and the wet spot can end up a room away from the source. Cutting at the stain is a guess. Testing is not.

We start by sorting the leak into a type: pressurized supply line, drain line, fixture, or something that is not plumbing at all. Each behaves differently. A supply leak runs constantly and moves the meter. A drain leak appears only when that fixture is used. Once we know which one it is, isolating the exact section goes quickly.

Signs of a leak you cannot see

  • The flow indicator on the meter moves when nothing in the house is running
  • A water bill well above your usual
  • Paint that blisters, drywall that goes soft or a stain that keeps growing
  • A musty smell that comes back after cleaning
  • A strip of lawn between the meter and the house that stays green or soggy

Process

The job, step by step

  1. Read the meter

    With everything off, the meter shows whether pressurized water is escaping and roughly how much.

  2. Divide the system

    We close valves to separate the yard line from the house, then hot from cold, until one section is left.

  3. Pinpoint

    Listening equipment, pressure testing and moisture readings narrow that section to a spot. The spot is marked, and you get the price for fixing it.

  4. Repair and prove it

    After you approve, we fix the line, then retest to confirm the meter has stopped.

Local context

The North Texas factor

Three North Texas habits make leaks harder to spot. Water lines run under slabs, so a failed pipe can drain into the soil for weeks without a puddle. Water heaters and supply lines often sit in attics, so the first sign is a ceiling stain. And lawns are irrigated, which hides a leaking yard line under grass that looks healthy. One more local trap: in summer, a ceiling stain near the air handler is often a clogged AC condensate drain, not a pipe. A meter test sorts that out in a few minutes.

Questions

Leak Detection questions, answered

How do I read my water meter for a leak?

Turn off everything that uses water, including the ice maker and the irrigation controller. Take the cover off the meter box, which sits by the curb or in the alley. An analog meter has a tiny low-flow wheel that spins at the slightest draw. A digital one displays a flow figure. Any movement with the house shut down is a leak.

Is a running toilet really a leak?

Yes, and it is the most common one. A worn flapper can send a steady trickle into the bowl all day. Dye is the test. Tint the water in the tank with food coloring, leave the toilet alone for a quarter of an hour, then look in the bowl. Tinted water there means the flapper is passing.

Could the leak be in the yard instead of the house?

Yes. The service line between the meter and the house is a common place for leaks, and it belongs to the homeowner. If your home has a shut-off valve where the line enters, close it and check the meter. If the meter still moves, the leak is in the yard line or the irrigation system, not inside the house.