Lonestar Plumber in The Colony
Faucet Installation Frisco, TX
Faucet installation in Frisco works with the faucet you already bought. The sink holes, the shutoff valves and the space below the counter are looked at first. Once the new faucet is in, both sides run full, the cabinet is checked dry, and the old faucet and the packaging go with the plumber.

Frisco homes and faucet installation
Pick a faucet with Frisco's water in mind. Hardness ran 96 to 200 ppm in the 2025 report, which labels the water moderately hard, and those minerals show up as white spots on the finish and scale in the aerator. Mineral spots show least on brushed nickel or stainless and most on polished chrome or matte black. A faucet whose aerator unscrews easily, and whose cartridge is sold as a separate part, is easier to live with for the next decade. Spray heads with soft rubber nozzles let scale be rubbed off with a thumb, a small feature worth having here.
The water itself is in good shape. The Texas Commission on Environmental Quality gives Frisco's system a Superior rating, and the North Texas Municipal Water District treats the water before the city buys it. A new faucet goes in on new supply lines, and those lines get flushed ahead of fitting the aerator, so installation debris never reaches the cartridge. If the shutoff valves under the sink are original, a turn on each shows whether they still close; a stiff or weeping one is replaced while the water is off.
In the city's mostly 2000s and 2010s kitchens, built around a median year of 2009, the sink often has extra holes drilled for a sprayer, soap dispenser or air gap. Count them before buying, because a deck plate can cover one spare hole but not two. If the sink has an air gap for the dishwasher, a leak from it onto the counter during a cycle usually means a clogged hose behind it. In a rental, which describes about a third of the city's occupied homes (66% are owner-occupied), the landlord may pick the faucet and approves the price.
Frisco at a glance
- County
- Collin County (east) and Denton County (west)
- Typical home
- Median year built 2009
- Water supply
- City of Frisco, buying treated water from NTMWD's Wylie plant
- Water hardness
- 96 to 200 mg/L (ppm) total hardness in 2025, 'moderately hard'
- Permit office
- Building Inspections, City Hall, 6101 Frisco Square Blvd., Frisco 75034
- From our office
- About 7 miles from our Main St office in The Colony
Good reasons for a new faucet
- A cracked body or a finish flaking away
- Repairs that keep coming back
- Parts no longer made for your model
- A new sink, countertop or vanity
- A wish for a pull-down sprayer or a lever that is easier on the hands
Questions from Frisco
Will the city want a permit for a new faucet?
Frisco's permit pages do not mention faucet swaps, and unlisted jobs, by the city's own advice, are a question for the Building Inspections Division in City Hall. Replacing a faucet on the same sink changes no pipe, which is a different matter from moving a sink or adding one in a remodel.
Is a touchless faucet a good idea with hard water?
It can be. The sensor and valve sit under the counter, away from the spray, but the valve has a small inlet screen that scale and grit can clog. With moderately hard water, choose a model whose screen can be reached and cleaned, and check the power source: batteries, or an outlet under the sink.
Can you install a faucet I bought online?
Yes. Check the box first: some faucets ship without supply lines or a deck plate, and the hole count has to match your sink. Keep the instructions for any model-specific parts.
Booking in Frisco
Call (469) 940-4415 with the sink type, the number of holes and whether the faucet is already bought. Empty the cabinet under the sink so the valves are easy to reach, and keep every part of the new faucet in its box.
