Lonestar Plumber in The Colony
Faucet Installation Little Elm, TX
Faucet installation in Little Elm works with the faucet you picked, whether it came from a store or a delivery box. The sink's hole count, the stop valves and the space below are checked first, the price is agreed while the old faucet is still on the sink, and the box and old fixture leave with the plumber.

Little Elm homes and faucet installation
Lead is a smaller question here than in older towns. Little Elm's inventory lists 100% non-lead service line materials, and its 2025 lead sampling at household taps ran from 1 to 5 ppb. Inside the house, any faucet now sold for drinking water has to pass federal lead-free rules, so a new kitchen faucet keeps it that way from the street to the glass. The town's online map shows the service line material for each address, if you want to check yours.
The water also shapes the choice. Little Elm's water, treated upstream by the North Texas Municipal Water District, tested as hard as 200 ppm in 2025. Ceramic-disc cartridges shrug off that scale better than rubber washers, a spray head with soft rubber nozzles lets you rub deposits away with a thumb, and a finish that hides water spots saves wiping. Those are worth weighing before you buy. Touchless and pull-down models carry more moving parts that scale can reach, so on water this hard, a model with replaceable spray heads and valves is the safer buy.
Under the sink, expect builder originals. Many kitchens and baths were finished around 2011, when the median home here went up, so the supply lines and stop valves are as old as the faucet. Braided lines that age go out with the old faucet as a matter of course. A stop valve that won't shut all the way, or weeps when turned, is better replaced now than discovered during the next leak. At a kitchen sink, the dishwasher's hot line often shares the same stop valve through a tee, and it is checked while the cabinet is empty. Laundry tub faucets, often a basic two-handle model, are a quick swap when one starts to drip.
Little Elm at a glance
- County
- Denton County
- Typical home
- Median year built 2011
- Water supply
- Town of Little Elm, buying treated water from NTMWD in Wylie
- Water hardness
- 96 to 200 mg/L (ppm) total hardness in 2025
- Permit office
- Building Safety, Town Hall 2nd floor, 100 W. Eldorado Pkwy.
- Permit portal
- MyGov online permitting
- From our office
- About 8 miles from our Main St office in The Colony, mostly by FM 423
Good reasons for a new faucet
- A cracked body or a finish flaking away
- Repairs that keep coming back
- Parts no longer made for your model
- A new sink, countertop or vanity
- A wish for a pull-down sprayer or a lever that is easier on the hands
Questions from Little Elm
Is a filter faucet worth it on town water?
That depends on what bothers you. Most owners who add one want to cut the chloramine taste: NTMWD disinfects with chloramines, and only a carbon filter rated for chloramine, not just chlorine, takes it out. A filter does nothing for hardness; that takes a softener.
Does a new faucet need a permit in town?
The town's rules do not name faucet replacement either way. A like-for-like swap on the existing stop valves changes no pipe. Moving a faucet, adding a pot filler or running a new line does, and Building Safety treats new piping as permit work under the 2018 IPC the town has adopted.
Can you install a faucet I bought online?
Yes. Check the box first: some faucets ship without supply lines or a deck plate, and the hole count has to match your sink. Keep the instructions for any model-specific parts.
Booking in Little Elm
Call (469) 940-4415 with the sink type, the number of holes and whether the faucet is already bought. Empty the cabinet under the sink so the valves are easy to reach, and keep every part of the new faucet in its box.
