Daily 8 AM–8 PMOffice on Main St, The Colony

Lonestar Plumber in The Colony

Faucet Installation Oak Point, TX

Faucet installation in Oak Point, about 14 miles up FM 720 from The Colony, can mean fitting a model you chose and bought yourself. The holes, deck and shutoffs are checked before the price is set, and the plumber takes away the old faucet along with the new one's carton.

Chrome pull-down kitchen faucet running water into a stainless steel sink set in a white countertop

Oak Point homes and faucet installation

Most kitchens and baths in town came with the house, and a typical house here dates from about 2008. Sinks of that era were mostly standard: single-hole or three-hole kitchen decks and 4-inch or 8-inch vanity spreads, so most new faucets fit without changing the counter. The shutoff valves under those sinks, though, are now old enough to stick or weep when turned, and they are best replaced while the faucet is off.

The water is worth a thought when you choose a finish. Mustang SUD's well water is very soft, so hard-water spotting is milder than in many towns, but it carries 222 ppm of sodium on average and a high load of other dissolved salts that dry as a white film, most visible on dark finishes. Brushed and satin finishes hide it better than matte black. Some households also want a separate filtered tap for drinking water; a spare sprayer or soap hole can often take one, and that is planned before any work begins. Touchless and pull-down models also need room under the sink for a control box or a hose weight, which is measured first.

Water reaches those taps from one of two suppliers. Mustang draws on its own wells and on Lewisville Lake water treated by the Upper Trinity district, while Undine Texas pipes water to Wellington Trace, to Gates of Waters Edge and to a few streets near Yacht Club Road. The install is the same either way. When a counter or vanity is being replaced as well, the faucet goes on after the new top is set, with fresh supply lines fitted at the same visit. With the old faucet off, the deck beneath it is cleaned of film and old putty before the new faucet goes down.

Oak Point at a glance

County
Denton County
Typical home
Median year built 2008
Water supply
Two suppliers by subdivision: Mustang SUD or Undine Texas
Water hardness
Mustang SUD 2025: total hardness 3.68 to 5.48 ppm (very soft)
Permit office
Building Inspections at City Hall, 100 Naylor Rd.
From our office
About 14 miles from our Main St office in The Colony, mostly by FM 720

Good reasons for a new faucet

  • A cracked body or a finish flaking away
  • Repairs that keep coming back
  • Parts no longer made for your model
  • A new sink, countertop or vanity
  • A wish for a pull-down sprayer or a lever that is easier on the hands

Questions from Oak Point

Will a new faucet get rid of the white film on our fixtures?

No. The film comes from the water, not the faucet. Mustang SUD's supply is soft but rich in sodium and other dissolved solids, and they dry on any surface they touch. A finish that hides spotting and a wipe after use help more than a new model. If the film is crusting inside the aerator, that is a cleaning job, not a replacement.

Can a pull-down kitchen faucet go on our original sink?

Usually. Most builder sinks from the 2000s have one hole or three, and a pull-down needs one, with a deck plate to cover the others. What matters is the hose's path: it needs room to drop under the sink without snagging on the disposal or the drain, and that clearance is measured first.

Can you install a faucet I bought online?

Yes. Check the box first: some faucets ship without supply lines or a deck plate, and the hole count has to match your sink. Keep the instructions for any model-specific parts.

Booking in Oak Point

Call (469) 940-4415 with the sink type, the number of holes and whether the faucet is already bought. Empty the cabinet under the sink so the valves are easy to reach, and keep every part of the new faucet in its box.

Start with the symptom.

Call now